CdS半导体纳米晶体高强度激发下光谱特性研究

CdS半导体微晶作为代表性介观材料(mesoscopic material)其光学吸收和发光与量子尺寸效应的关系已经得到广泛研究[1-4],发现随着CdS微晶尺寸减小,CdS本征吸收和发射带呈现显著蓝移.Rossetti等人[3]和Y.Wang等人[4]分别通过对溶胶、沸石、聚合物和玻璃中CdS纳米晶体的光致发光测量研究了发光来源以及发光与尺寸的关系,确定了两个宽带发光分别属于带隙发光(350-500nm)和表面态或缺陷发光(500-700nm).本文首次报道了利用溶胶凝胶方法制备的钠硼硅中纳米尺寸CdS晶体高激发功率条件下的发光光谱测量结果,观察到随激发功率增加发光光谱兰移和线宽明显宽化,讨论了其物理机制.     

The effects of sensory hearing loss on cochlear filter times estimated from auditory brainstem response latencies.

Derived-band auditory brainstem responses (ABRs) were obtained in 43 normal-hearing and 80 cochlear hearing-impaired individuals using clicks and high-pass noise masking. The response times across the cochlea [the latency difference between wave V's of the 5.7- and 1.4-kHz center frequency (CF) derived bands] were calculated for five levels of click stimulation ranging from 53 to 93 dB p.-p.e. SPL (23 to 63 dB nHL) in 10-dB steps. Cochlear response times appeared to shorten significantly with hearing loss, especially when the average pure tone (1 to 8 kHz) hearing loss exceeded 30 dB. Examination of derived-band latencies indicates that this shortening is due to a dramatic decrease of wave V latency in the lower CF derived band. Estimates of cochlear filter times in terms of the number of periods to maximum response (Nmax) were calculated from derived-band latencies corrected for gender-dependent cochlear transport and neural conduction times. Nmax decreased as a function of hearing loss, especially for the low CF derived bands. The functions were similar for both males and females. These results are consistent with broader cochlear tuning due to peripheral hearing loss. Estimating filter response times from ABR latencies enhances objective noninvasive diagnosis and allows delineation of the differential effects of pathology on the underlying cochlear mechanisms involved in cochlear transport and filter build-up times.     

混合卟啉体系中的光化学烧孔

在有机电子转移型烧孔体系中,混杂两种电子给体-苯并卟啉锌衍生物分子,可增加吸收带的非均匀宽度。本文通过对光谱孔的宽度和烧孔效率的讨论,证明了混杂电子给体的方法对孔宽和烧孔效率无明显影响,可以达到增加此类材料体系的烧孔数目,提高信息存储密度的目的。     

新型永久光谱烧孔材料及机理研究

利用永久光谱烧孔(Persistent spectral hole burning(PSHB))可使光学信息存储密度提高三个数量级以上[1].这一重要应用前景激励科学家探索和寻求具有较高的非均匀(inhomogeneous)线宽与均匀(homogeneous)线宽之比(决定存储密度)和可擦除性(erasable)新型光谱烧孔材料.有机材料易于进行分子设计和组装,是较理想的光存储(optical storage)材料.     

Synthesis and properties of chitosan‐based thermo‐ and pH‐responsive nanoparticles and application in drug release

In this research, thermo‐ and pH‐responsive nanoparticles with an average diameter of about 50–200 nm were synthesized via the surfactant‐free emulsion polymerization. The thermal/pH dual responsive properties of these nanoparticles were designed by the addition of a pH sensitive monomer, acrylic acid (AA), to be copolymerized with N‐isopropylacrylamide (NIPAAm) in a chitosan (CS) solution. The molar ratio of CS/AA/NIPAAm in the feed was changed to investigate its effect on structure, morphology, thermal‐ and pH‐responsive properties of the nanoparticles. It was found that CS‐PAA‐PNIPAAm nanoparticles could be well dispersed in the aqueous solution and carried positive charges on the surface. The addition of thermal‐sensitive NIPAAm monomer affected the polymerization mechanism and interactions between CS and AA. The particle size of the nanoparticles was found to be varied with the composition of NIPAAm monomer in the feed. The synthesized nanoparticles exhibited stimuli‐responsive properties, and their mean diameter thus could be manipulated by changing pH value and temperature of the environment. The nanoparticles showed a continuous release of the encapsulated doxycycline hyclate up to 10 days during an in vitro release experiment. The environmentally responsive nanoparticles are expected to be used in many fields such as drug delivery system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2798–2810, 2009     

Energy-dependent cross sections for the tritium-methane hot atom reactions

Using classical Monte Carlo trajectory methods, we have fitted a new kind of empirical potential energy hypersurface to combined experimental observations on the tritium-methane hot atom reactions. All channels (including Walden inversion) are now present and the degree of uniqueness is apparently high. We present our predicted cross sections as a function of tritium energy for the abstraction, inverting substituting, and total substitution reactions.     

Cation transport at 25°c from binary Tl+Mn+ and K+Mn+ nitrate mixtures in a H2OCHCl3H2O liquid membrane system containing a series of macrocyclic polyether carriers

Carrier-mediated cation fluxes were determined using a H₂OCHC1₃H₂O liquid merebrane system for TlNO₃ and for binary mixtures of either TlNO₃ or KNO₃ with alkali metal ions, alkaline earth metal ions, and Pb²⁺ (in the case of TlNO₃). Both macrocyclic polyether and cryptand ligands were used as carriers. In Tl⁺Mⁿ⁺ mixtures, selective transport of Tl⁺ was found over all cations studied, except in the cases of Ag⁺ by 2.2 and of Pb²⁺ by 18C6, DC18C6, ClDKP18C6, and 2.2. Generally, K⁺ was transported selectively from K⁺Mⁿ⁺ mixtures, except in the cases of K⁺Tl⁺ mixtures in which Tl⁺ was transported selectively in all cases. A model relating cation flux to log K(CH₃OH) for Mⁿ⁺—macrocycle interaction and to ion-partitioning between the organic and aqueous phases was successful in rationalizing selective cation transport in most of the systems studied.     

Solving NP-hard problems in ‘almost trees’: Vertex cover

We present an algorithm which finds a minimum vertex cover in a graph G(V, E) in time $\text{O}\text{(|V|+(}\text{a}\text{k}\text{)2}{}^{\mathrm{<mtext>k</mtext><mtext>3</mtext>}}\text{)}$, where for connected graphs G the parameter a is defined as the minimum number of edges that must be added to a tree to produce G, and k is the maximum a over all biconnected components of the graph. The algorithm combines two main approaches for coping with NP-completeness, and thereby achieves better running time than algorithms using only one of these approaches.